DIY pepper hotbed

<

A polycarbonate greenhouse for peppers is a great place to grow and produce a large crop of heat-loving crops. Making a greenhouse for pepper with your own hands will be quick and without any special expenses.

Content
  1. DIY greenhouse
  2. Production steps
  3. Selection of location and materials
  4. Greenhouse on the foundation
  5. Greenhouse from arcs
  6. Assembly process of an arched greenhouse
  7. Greenhouse from polypropylene pipes
  8. Greenhouse on wireframe
  9. Conclusion <

Парник для перца своими руками

DIY greenhouse for pepper

DIY greenhouse

Peppers – a culture that loves light and warmth, so guys often use it and for growing pepper. If you make the greenhouses for pepper yourself, you can save a lot. It’s better to make small greenhouses, the materials are better not to use very expensive and available from the grower.

Production steps

Among the stages of making greenhouses for peppers with their own hands, there are:

  • determination of the place for the construction;
  • acquisition of materials;
  • construction project;
  • assembly.

Choosing a place and materials

You need to approach the choice of the location of greenhouses for growing peppers responsibly, the following factors must be taken into account:

  • openness and sunlit terrain, the absence of irregularities, elevated and low-lying areas;
  • the lack of buildings and high vegetation;
  • the direction of the structure to the west-east;
  • site dimensions in width, length and height, respectively 1m, 3m, 0.5m.

The choice of materials for the manufacture of a greenhouse for peppers directly depends on abilities, skills and opportunities gardener. You need to understand what period of service is expected from the building, what quality is required from its use. Given all these points, making a greenhouse for salad pepper will not be difficult.

Greenhouse on the foundation

Bricks are laid along the entire length and width of the building, filled with cement .

Walls are erected using old boards. timber. This is based on the design of a box in the shape of a rectangle. Its upper part is closed with the help of an old frame or a frame consisting of slats and covered with a film. For convenience, the roof is fastened with hinges, it is created as a single-pitched or gable. On a pitched roof, one edge of the box is made 20–25 cm higher. The height of the box is no higher than 40–50 cm, otherwise the crops will not have enough lighting.

Greenhouse from arcs

Парник из ПВХ дуг прослужит вам долго

A greenhouse made of PVC arcs will last you a long time

PVC arcs are in demand among gardeners. They are characterized by high strength, have a good period of use and are universal.

First of all, we choose a good quality PVC arc. Provided that in the greenhouse for peppers crops will not grow until fully prepared, it is necessary to take arcs 0.7 m long. The width between the bases of the arcs is about 1.5 m, the choice depends on individual requests and the needs of gardeners.

The process of assembling an arched greenhouse

The number of elements that make up the structure depends on the future size of the structure. It is assumed that 1 arc is designed for approximately 1 m of the finished structure.

The assembly consists of the following steps:

  • preparation of the base from a bar or slats;
  • fastening arcs to the base or instantly digging them into chernozem;
  • the length between sectors is 70-80 cm
  • the top of the frame is fastened with reinforcement;
  • the structure is tightened film, fixing it with a stapler.

Greenhouse from polypropylene pipes

Using plastic pipes, it’s easy to create a greenhouse for peppers with your own hands. The foundation is necessary when creating a building for many years, but if it is needed for temporary use, we do without foundation.A more reliable construction requires the use of wooden blocks for the frame.

It is also necessary to build a kind of foundation – a frame of bars. Along the entire length of the frame obtained, reinforcement made of wood is inserted into the ground at the places of installation of the arcs parallel to each other at a distance of 45-60 cm. Pieces of PVC pipes are put on the reinforcement on both sides. Pipes are attached with fasteners to the frame. We cover the frame with film.

The height of the greenhouse is controlled by choosing the length of the pipes.

The greenhouse on the frame

This variation represents a structure of rack frames, covered with a film or polycarbonate. Frames are mounted on the base of timber or boards. The structure may take the form of a house or a rectangular box covered with a frame. When using polycarbonate, the construction will last much longer, albeit at a great cost.

greenhouse for growing peppers
DIY greenhouse
An ideal greenhouse for peppers made by Ilmir Asadullin

Conclusion

There are many types of constructions and greenhouses for growing peppers that you can make yourself. Creating them yourself will not take much time and effort, and getting the crop from all cults ur will be protected from adverse weather conditions.

You can bookmark this page

Anna Evans

Author ✓ Farmer

View all posts by Anna Evans →