Do-it-yourself drinkers for rabbits

In addition to the premises suitable for breeding pets on a private farm, its arrangement, including drinking bowls for rabbits, is of no small importance. You can mount ready-made devices purchased in specialized stores, but it’s not at all difficult to make do-it-yourself drinkers for rabbits.

  1. What can you do rabbit drinkers
  2. Material selection for structures
  3. Technologies for manufacturing simple drinkers
  4. The simplest devices from plastic
  5. Devices from pipes
  6. Devices from metal
  7. Vacuum and nipple devices
  8. Vacuum device
  9. For several rabbits
  10. Automatic constructions

Поилки для кроликов

Drinking bowls for rabbits

Ka You can make rabbit drinkers

The variety of species and options for making a drinker for rabbits with your own hands, there are dozens of species, each of which has its own advantages and disadvantages, different improvised tools and materials can be used for each.

  1. A cup drinking bowl for rabbits can also serve as a feeder; these are the easiest to make, affordable and primitive home-made drinking bowls for rabbits. To make such a drinker, plates and bowls, plastic bottles and cans are most often used. Among the main requirements is the prevention of overturning, therefore, an important factor is the method of attaching the device to the cage.Sometimes a homemade cup drinking bowl for rabbits requires weighting, so that its animals do not turn it over. This design is made heavier by hanging the load from the outside or securing it using a screw (it is better to suspend it more reliably).
  2. Semi-automatic devices are automatically replenished with water from a tank designed for this purpose, which can be used as a tank or plastic bottle. The cup for such a semiautomatic device is mounted using a removable method, and the water level is regulated by means of the bottom bracket. Typically, such a semi-automatic vacuum drinker is mounted at a distance of 3 cm from the floor and 3 cm from the cage wall, which provides the greatest protection against debris and excrement of eared pets.
  3. The automatic nipple drinker for rabbits has now found its consumer and is most demanded. Previously, a do-it-yourself car drinker for rabbits was found only on large farms. But gradually they began to apply on private farms. The design of the nipple drinker for rabbits consists of a water-accumulating distribution tank, from which the tubes extend towards the cages. These constructions are equipped with a special nipple in the form of a ball (cover), when pressed, water begins to flow.
See also  The device cages for rabbits according to the method of Zolotukhin

For apartment keeping, when one decorative rabbit lives, the most convenient option will be a purchased auto-drinker.And with industrial maintenance, you can make drinkers for rabbits with your own hands.

Homemade water supply devices for rabbits are not afraid of damage, in which case it is much easier to fix them than purchased equipment. A vacuum drinking bowl is more reliable, and it will be no more difficult to make it than an automatic one.

Material Selection for Structures

In the manufacture and fastening of mechanical and automatic do-it-yourself drinkers for rabbits, various materials and fixtures are required:

  • most often home designers use wire as fasteners for cup devices;
  • metal sheets made of galvanized iron are often used as material for self-construction;
  • often under auxiliary solid walls require wood: planks, wooden blocks, PVC or plywood.

When making drinkers for rabbits independently, all improvised tools that can be used, starting with plastic sewer pipes and plastic, are often used bottles and cans from under water and drinks, ending with ceramic mugs in cup constructions for drinking animals.

As a tool for making do-it-yourself drinkers for rabbits, you will need to prepare pliers, scissors for cutting metal, a drill for drilling holes. If the plans for a vacuum drinking bowl will need the same materials, plus a special cover.

Production technologies for simple drinkers

Depending on the complexity of the chosen design, manufacturing technologies may differ in their actions. So the equipment from pipes for large farms will require a significant investment of time and materials.

See also  Is it possible to introduce sorrel in the diet of rabbits

The simplest plastic devices

You can make simple constructions yourself from an ordinary plastic bottle, taking a container with a volume up to 1.5 liters A hole is made in it, the size of which is the width of a pet’s head. The bottle is attached to the cage using wire. Their advantages are simplicity and minimal costs, ease of care. Among the shortcomings is the fragility, as adult individuals bite such products without much difficulty.

Pipe devices

Making this type of drinker for rabbits with your own hands is easy. It is necessary to take an asbestos-cement pipe, which from the ends is blocked by cans from under canned food, they will serve as a lid. The principle is like a plastic bottle with a hole.

Metal devices

In the process of making a rabbit drinker yourself, stainless steel is needed. The sharp edges of the metal sheet are smoothed with a file, the seams are soldered, as shown in the video. In the resulting metal structure, a container of water is fixed. The most economical option is to use galvanized sheets.

See also  Popular breeds of rabbits for home breeding

For several rabbits

To provide enough water for several pets at the same time, it’s better to use a large fish can, which is 2 / higher in height, as equipment 3 UK adyvayutsya wooden blocks. In this jar, a three-liter plastic bottle is sharply tipped over and attached to them. As a result, water should fill only free 2/3 of the can.

Automatic constructions

Among the home-made car drinkers, the drip nipple systems became the most popular.

To make a structure with a nipple water supply system on your own, you will need a plastic container and nipple balls that are screwed onto the neck of the bottle. You can watch the video on how to do this and how the nipple system works.

DIY Drinking bowls for rabbits do it yourself
The best drinker for rabbits (h. 7)
Drinking bowl for rabbits.
Breeding rabbits. Automatic drinker for rabbits from improvised materials. 100% works
DIY do-it-yourself drinking bowls for rabbits

It must be remembered that in winter growing conditions the nipples can freeze. For the winter, rabbit breeders do heating, as you can see the video about.

Another option for a car drinker is needed when a large livestock is alive It uses a large storage tank with a volume of at least 10 l, a pipe made of plastic or rubber and several nipples. The tank is installed near the cells. Distribution bends are made from the main tank using pipes. A hose is wound into each cell through the hole made in the wall at the end of the nipple. You can see how the drawing looks in the photo.

See also  Why dream of hares and rabbits

You can bookmark this page

Anna Evans

Author ✓ Farmer

View all posts by Anna Evans →